Filter
Top Products
Cisco EtherSwitch Service Modules Feature Guide
How to Configure the Cisco EtherSwitch Service Module
43
Cisco IOS Release 12.2(25)SEC
Default VLAN VLAN 1
VLAN trunking Dynamic auto (DTP)
Trunk encapsulation Negotiate
VTP
4
mode Server
VTP version 1
Voice VLAN Disabled
STP
5
PVST+
6
enabled on VLAN 1
MSTP
7
Disabled
Optional spanning-tree features Disabled
DHCP snooping
DHCP snooping Disabled
DHCP snooping information option Enabled
IGMP snooping
IGMP
8
snooping Enabled
IGMP filters None applied
IGMP throttling Deny
MVR Disabled
Port-based traffic
Broadcast, multicast, and unicast storm
control
Disabled
Protected ports None defined
Unicast and multicast traffic flooding Not blocked
Secure ports None configured
CDP
9
Enabled
UDLD
10
Disabled
SPAN
11
and RSPAN
12
Disabled
RMON
13
Disabled
Syslog messages Enabled; displayed on the console
SNMP Enabled; version 1
ACLs None configured
QoS Disabled
EtherChannels None configured
IP unicast routing Disabled
HSRP groups None configured
IP multicast routing Disabled on all interfaces
MSDP
14
Disabled
Fallback bridging Not configured
Table 2 Default Settings (continued)
Feature Default Setting