Appendix C SGM Command Reference
sgm statreps link
C-110
Cisco Signaling Gateway Manager User Guide
OL-5742-01
sgm statreps link
Solaris Only
Full Syntax
sgm statreps [link | nolink]
Command Description
Specifies whether SGM is to generate link and linkset statistics summary reports:
• link—Generate link and linkset statistics summary reports.
• nolink—Do not generate link and linkset statistics summary reports. This is
the default setting.
See the “Viewing SGM Link and Linkset Statistics Reports” section on
page 15-11 for more information on link and linkset statistics summary reports.
You must be logged in as the root user or as a super user to use this command.
List of SGM Commands
• SGM Command Reference, page C-1.
sgm statreps mlr
Solaris Only
Full Syntax
sgm statreps [mlr | nomlr]
Command Description
Specifies whether SGM is to generate MLR processed, aborts, continues,
subtriggers, and triggers reports:
• mlr—Generate MLR processed, aborts, continues, subtriggers, and triggers
reports. MLR reporting must be enabled in order for SGM to generate MLR
reports.
• nomlr—Do not generate MLR reports. This is the default setting.