Appendix C SGM Command Reference
sgm tnproxy
C-120
Cisco Signaling Gateway Manager User Guide
OL-5742-01
sgm tnproxy
Solaris Only
Full Syntax
sgm tnproxy [disable | enable | status]
Command Description
Manages a Telnet proxy. A Telnet proxy resides on a server and forwards Telnet
requests from clients to ITPs that are accessible only from that server. A Telnet
proxy is typically used to enable remote clients on desktop networks to Telnet to
ITPs that otherwise would be unreachable.
• disable—Disables SGM Telnet proxy support. This is the default setting.
• enable—Enables SGM to use a Telnet proxy, and prompts you to restart the
SGM server. When you restart the server, SGM automatically starts the Telnet
proxy process.
• status—Indicates whether SGM Telnet proxy support is currently enabled or
disabled.
You must be logged in as the root user or as a super user to use this command.
List of SGM Commands
• SGM Command Reference, page C-1.
sgm trapaccess
Solaris Only
Full Syntax
sgm trapaccess [add [ip-addr] | clear | edit | list | rem [ip-addr] | sample]
Command Description
Enables you to create and manage a list of ITP IP addresses allowed to send traps
to the SGM server.