Filter
Top Products
Appendix C SGM Command Reference
sgm mldebug
C-54
Cisco Signaling Gateway Manager User Guide
OL-5742-01
sgm mldebug
Solaris Only
Full Syntax
sgm mldebug [mode]
Command Description
Sets the mode for logging SGM debug messages:
• normal—Logs all action, error, and info messages. Use
sgm mldebug normal to revert to the default settings if you accidentally
enter the sgm mldebug command.
• list—Displays the current settings for the sgm mldebug command.
• all—Logs all messages, of any type.
• none—Logs no messages at all.
• minimal—Logs all error messages.
• action—Logs all action messages.
• debug—Logs all debug messages.
• dump—Logs all dump messages.
• error—Logs all error messages.
• info—Logs all info messages.
• snmp—Logs all SNMP messages.
• trace—Logs all trace messages.
This command can adversely affect SGM performance. Use this command only
under guidance from the Cisco TAC.
You must be logged in as the root user or as a super user to use this command.
List of SGM Commands
• SGM Command Reference, page C-1.