Filter
Top Products
Appendix C SGM Command Reference
sgm updateuser
C-124
Cisco Signaling Gateway Manager User Guide
OL-5742-01
You must be logged in as the root user or as a super user to use this command.
List of SGM Commands
• SGM Command Reference, page C-1.
sgm updateuser
Solaris Only
Full Syntax
sgm updateuser [username]
Command Description
If SGM User-Based Access is enabled, changes the authentication level for the
specified user. Valid levels are:
• 1—Basic User
• 2—Power User
• 3—Network Operator
• 4—Network Administrator
• 5—System Administrator
If sgm authtype is set to local, this command also enables you to change the
following settings:
• User’s password. When setting the password, follow the rules and
considerations in the “Creating Secure Passwords” section on page 18-5.
See the “Enabling and Changing Users and Passwords (Solaris Only)” section on
page 18-16 for more information on authentication levels, and on the use of this
command.
You must be logged in as the root user or as a super user to use this command.
Note If you have enabled Solaris authentication, you must be logged in as the root user,
not a super user, to use this command. See the “Implementing SGM User-Based
Access (Solaris Only)” section on page 18-2 for more information.