Filter
Top Products
Appendix C SGM Command Reference
sgm trapsetup
C-122
Cisco Signaling Gateway Manager User Guide
OL-5742-01
sgm trapsetup
Solaris Only
Full Syntax
sgm trapsetup [disable]
Command Description
Stops the SGM server, configures SGM to receive SNMP traps (or prevents SGM
from receiving traps), then restarts the SGM server. SGM gives you the option to
receive traps natively or using HP OpenView.
When you select an SNMP trap port number for the SGM server, make sure your
ITPs use the same SNMP trap port number. See the description of the
snmp-server host command in the “ITP Requirements” section of the
Cisco Signaling Gateway Manager Installation Guide for more information.
To prevent SGM from receiving traps, enter the sgm trapsetup disable command.
SGM restarts the SGM server.
You must be logged in as the root user (not as a super user) to use this command.
List of SGM Commands
• SGM Command Reference, page C-1.
sgm trapstatus
Solaris Only
Command Description
Displays the current trap reception configuration for SGM, including:
• SNMP trap integration type:
–
native—SGM receives traps natively on a UDP port.
–
hpov—SGM receives traps using HP OpenView.
• For native, SGM also displays the UDP port number on which SGM receives
traps natively.