Filter
Top Products
Appendix C SGM Command Reference
sgm ssl
C-98
Cisco Signaling Gateway Manager User Guide
OL-5742-01
sgm ssl
Solaris Only
Full Syntax
sgm ssl [enable | disable | status]
Command Description
If you have obtained the SSL-enabled version of SGM and installed an SSL
key/certificate pair in SGM, you can use this command to manage SSL support in
SGM:
• enable—Enables SSL support. If you enter this command and SSL has not
been implemented in your SGM system, SGM prompts you to contact Cisco
TAC or your Cisco Account Team for help in implementing SSL.
• disable—Disables SSL support.
• status—Displays the current status of SSL support in SGM, including
whether SSL support is enabled or disabled and which SSL keys and
certificates exist.
See the “Implementing SSL Support in SGM” section on page 18-26 for more
information on the use of this command.
You must be logged in as the root user (not as a super user) to use this command.
List of SGM Commands
• SGM Command Reference, page C-1.
sgm sslstatus
Solaris Only
Command Description
If SSL is implemented in your SGM system, displays current status for SSL
support in SGM, including whether SSL support is enabled or disabled and which
SSL keys and certificates exist.