Filter
Top Products
C-45
Cisco Signaling Gateway Manager User Guide
OL-5742-01
Appendix C SGM Command Reference
sgm jspport
sgm jspport
Solaris Only
Full Syntax
sgm jspport [port-number]
Command Description
Sets a new port number for the JSP server, where port-number is the new, numeric
port number. SGM verifies that the new port number is not already in use.
This command is needed only if you must change the port number after you install
SGM, because another application must use the current port number.
The new port number must contain only numbers. If you enter a port number that
contains non-numeric characters, such as sgm13, SGM displays an error message
and returns to the command prompt without changing the port number.
You must be logged in as the root user (not as a super user) to use this command.
List of SGM Commands
• SGM Command Reference, page C-1.
sgm keytool
Solaris Only
Full Syntax
sgm keytool [clear | genkey | import_cert cert_filename |
import_key key_filename cert_filename | list | print_csr | print_crt]
Command Description
If SSL is implemented in your SGM system, manages SSL keys and certificates
on the SGM server.
If you installed the SGM server and client on the same workstation, also
automatically manages the certificates on the client.