Filter
Top Products
Appendix C SGM Command Reference
sgm badlogindisable
C-14
Cisco Signaling Gateway Manager User Guide
OL-5742-01
List of SGM Commands
• SGM Command Reference, page C-1.
sgm badlogindisable
Solaris Only
Full Syntax
sgm badlogindisable [number-of-attempts | clear]
Command Description
If SGM User-Based Access is enabled, number of unsuccessful login attempts by
a user allowed before SGM disables the user’s authentication. SGM does not
delete the user from the authentication list, SGM only disables the user’s
authentication. To re-enable the user’s authentication, use the sgm enableuser
command.
The valid range is 1 unsuccessful attempt to an unlimited number of unsuccessful
attempts. The default value is 10 unsuccessful attempts.
To disable this function (that is, to prevent SGM from automatically disabling a
user’s authentication after unsuccessful login attempts), enter sgm
badlogindisable clear.
See the “Automatically Disabling Users and Passwords (Solaris Only)” section on
page 18-10 for more information on the use of this command.
You must be logged in as the root user or as a super user to use this command.
List of SGM Commands
• SGM Command Reference, page C-1.