A-2
Cisco uBR10012 Universal Broadband Router Troubleshooting Guide
OL-1237-01
Appendix A Unsupported Commands
HCCP Commands
• frame-relay map ip ip-address dlci [broadcast] [cisco | ietf] [nocompress] tcp
header-compression {active | passive}
• frame-relay mincir {in | out} bps
• frame-relay traffic-rate average [peak]
• frame-relay traffic-shaping
• show frame-relay ip [rtp | tcp] header-compression [interface]
HCCP Commands
The following commands are supported in Cisco IOS Release 12.2(8)BC2 and later 12.2 BC releases.
These commands are not supported in previous releases.
• hccp authenticate
• hccp authenticate key-chain
• hccp ds-switch
• hccp lockout
• hccp protect
• hccp revert
• hccp reverttime
• hccp switch
• hccp timers
• hccp track
• hccp unlockout
• hccp working
• show hccp
• show hccp interface
• debug hccp authentication
• debug hccp events
• debug hccp sync
MLPPP Commands
The following commands are supported in Cisco IOS Release 12.2(4)BC1 and later 12.2 BC releases.
These commands are not supported in previous releases.
• multilink load-threshold
• multilink max-fragments
• ppp multilink fragment-delay
• ppp multilink fragmentation
• ppp multilink idle-link
• ppp multilink interleave