Cisco Systems VIP-FE-TX/4E Network Card User Manual


 
VIP-FE-TX/4E Installation and Configuration 31
VIP Port Adapter Functions
FE-TX Port Adapter Description and Fast Ethernet Specifications
The FE-TX port adapter is available in the following VIP configurations: FE-TX/blank, FE-TX/4E,
or FE-TX/FE-TX. (For a description of the 4E port adapter, refer to the section “4E Port Adapter”
on page 44.) Figure 14 shows VIP-FE-TX/4E. The FE-TX and 4E port adapters have a handle
attached, but this handle is not shown to allow a full view of detail on each port adapter’s faceplate.
Figure 14 VIP with One FE-TX and One 4E Port Adapter Installed (Horizontal Orientation Shown)
Caution
To prevent system problems, do not remove port adapters from the VIP motherboard, or
attempt to install other port adapters on the VIP motherboard.
H4711
DRAM
SIMMs
Microcode
Flash U17
Bus connector
ETHERNET-10BT
LINK
1
3
0
2
0
1
2
3
MII
LINK
RJ45
0
FAST ETHERNET
U2
U1
FE-TX in
port adapter
slot 0
4E in port
adapter
slot 1
Port adapter
handles not shown