Filter
Top Products
40 VIP-FE-TX/4E Installation and Configuration
VIP Port Adapter Functions
Fast Ethernet interface port adapters are numbered from 0 and 1 because VIPs support up to two
100BASE-T ports. The MII and RJ-45 ports on a port adapter each have the same port number
because only one of them can be used at one time.
Refer to Table 5, Table 6, Table 7, Table 8, and Table 9 for the FE-TX port numbers associated with
the interface processor slots in your chassis. If you install a VIP with two FE-TX port adapters, you
can configure both ports; if you install a VIP with one FE-TX port adapter, you need configure only
that port.
Note Table 5, Table 6, Table 7, Table 8, and Table 9 indicate FE-TX interface port numbers based
on the slots in which they can be installed; they do not represent examples of maximum FE-TX
configurations.
Table 5 FE-TX Slot, Port Adapter, and Port Numbers in a Cisco 7000
Table 6 FE-TX Slot, Port Adapter, and Port Numbers in a Cisco 7010
Table 7 FE-TX Slot, Port Adapter, and Port Numbers in a Cisco 7505
Table 8 FE-TX Slot, Port Adapter, and Port Numbers in a Cisco 7507
Slot 0/
Adapter n/
Port 0
Slot 1/
Adapter n/
Port 0
Slot 2/
Adapter n/
Port 0
Slot 3/
Adapter n/
Port 0
Slot 4/
Adapter n/
Port 0
0/0/0 1/0/0 2/0/0 3/0/0 4/0/0
0/1/0 1/1/0 2/1/0 3/1/0 4/1/0
Slot 0/
Adapter n/
Port 0
Slot 1/
Adapter n/
Port 0
Slot 2/
Adapter n/
Port 0
0/0/0 1/0/0 2/0/0
0/1/0 1/1/0 2/1/0
Slot 0/
Adapter n/
Port 0
Slot 1/
Adapter n/
Port 0
Slot 2/
Adapter n/
Port 0
Slot 3/
Adapter n/
Port 0
0/0/0 1/0/0 2/0/0 3/0/0
0/1/0 1/1/0 2/1/0 3/1/0
Slot 0/
Adapter n/
Port 0
Slot 1/
Adapter n/
Port 0
Slot 4/
Adapter n/
Port 0
Slot 5/
Adapter n/
Port 0
Slot 6/
Adapter n/
Port 0
0/0/0 1/0/0 4/0/0 5/0/0 6/0/0
0/1/0 1/1/0 4/1/0 5/1/0 6/1/0