Filter
Top Products
Configuring the WAP4410N Wireless-N Access Point
Administration
WAP4410N Wireless-N Access Point with Power Over Internet 55
6
- E-Mail Address for Logs—Enter the e-mail address that will receive
logs.
- Log Queue Length—Enter the length of the log that will be e-mailed to
you. The default is 20 entries.
- Log Time Threshold—Enter how often the log will be emailed to you.
The default is 600 seconds (10 minutes).
• Syslog Notification—Syslog is a standard protocol used to capture
information about network activity. The access point supports this protocol
and sends its activity logs to an external server. To enable Syslog, click
Enabled. The default is Disabled.
- Syslog Server IP Address—Enter the IP address of the Syslog server. In
addition to the standard event log, the access point can send a detailed
log to an external Syslog server. The access point’s Syslog captures all
log activities and includes this information about all data transmissions:
every connection source and destination IP address, IP server, and
number of bytes transferred.
• Log—Select the events that you want the access point to keep a log.
- Unauthorized Login Attempt—If you want to receive alert logs about
any unauthorized login attempts, click this check box.
- Authorized Login—If you want to log authorized logins, click this check
box.
- System Error Messages—If you want to log system error messages,
click this check box.
- Configuration Changes—If you want to log any configuration changes,
click the check box.
- View Log—If you want to see the logs, click the button.
STEP 3 Click Save.