Filter
Top Products
Specifications
WAP4410N Wireless-N Access Point with Power Over Internet 81
D
Rogue AP Detection
New access points detected, which have not been
categorized as known, are logged as rogue access points.
This allows the administrator to control unapproved
devices in the network.
QoS
4 queues, 802.1p VLAN priority, WMM Wireless priority,
Mapping of 802.1p priority to WMM priority to maintain
end-to-end QoS
Spec/Modulation
Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM,
11n/MIMO-OFDM
Channels
Operating Channels: 11 North America, 13 Most of Europe
(ETSI and Japan)
Internal Antenna
None
External Antennas
3 (omni-directional)
Transmit Power
Transmit Power at Normal Temp Range for FCC:
11b - 16 dBm@1TX, 19 dBm@2TX, 20.5dbm@3TX;
11g - 13 dBm@1TX, 16 dBm@2TX, 19dbm@3TX
11n - 20 dBm@MCSO~4/8~12, 18dBm@MCS5/13,
14dBm@MCS6/14, 12dBm@MCS7/15
Transmit Power at Normal Temp Range for ETSI:
11b/g/n: 18.5dBm
Antenna Gain in dBi
2
Receiver Sensitivity
11.n: 300Mbps@ -69dBm, 11.g: 54Mbps@ -73dBm, 11.b:
11Mbps@ -88dBm
Device Dimensions
6.69X6.69X1.60 inches (170X170X40.7mm)
0.86 lbs. (0.39 kg)
Power
12V 1A DC input, and IEEE802.3af Compliant PoE.
Maximum power draw is 10.1 Watts.
Certification
CC, CE, IC
Operating Temperature
32°F to 104°F (0°C to 40°C)
Storage Temperature
-4°F to 158°F (-20°C to 70°C)
Operating Humidity
10% to 85% Non-Condensing
Storage Humidity
5% to 90% Non-Condensing
WAP4410N Specifications (Continued)