Filter
Top Products
Upgrading Firmware
WAP4410N Wireless-N Access Point with Power Over Internet 78
C
To upgrade the firmware of the access point, follow these steps:
STEP 1 Back up the configuration settings of your access points (see “Managing the
Access Point’s Configuration” on page 60).
STEP 2 Upgrade the access point’s firmware:
a. Download the firmware upgrade file from:
www.cisco.com/en/US/products/ps10052/index.html
b. Extract the firmware upgrade file.
c. Click Administration > Firmware Upgrade.
d. In the File field, enter the location of the firmware upgrade file or click the
Browse button to locate the file.
e.
Click Upgrade and follow the on-screen instructions.
STEP 3 Re-enter all of your custom configuration settings.