Filter
Top Products
Specifications
WAP4410N Wireless-N Access Point with Power Over Internet 80
D
Multiple BSSID
Supports up to 4 BSSIDs allowing creating of multiple
virtual access points
VLANs
Supports 802.1q - up to 4 VLANs
SSID to VLAN mapping
Supports mapping of SSIDs to VLANs to securely
separate workgroups across wireless and wired domains
802.1x Supplicant
Supports 802.1x Supplicant on the Ethernet port to allow
the AP to authenticate itself to the network
Spanning Tree
Supports 802.1d Spanning Tree protocol to prevent loops
when using WDS links as redundant links in a distribution
system
Operating Modes
Access Point Mode, point-to-point Bridge Mode, point-to-
multipoint Bridge Mode, Repeater Mode, Wireless Client
Mode
Load Balancing
This capability allows the bandwidth control with user
defined CPU usage ratio
Auto-channel selection
On boot up, the AP selects the least congested channel
802.11d
With 802.11d Regulatory Domain support, the AP provides
radio channel settings for client devices facilitating easy
client access as they move across regulatory domains
WEP/WPA/WPA2
WEP 64bit/128bit, WPA-TKIP, WPA2-AES,
WPA-Enterprise, and WPA2-Enterprise
Access Control
Wireless Connection Control: MAC-Based
SSID Broadcast
SSID Broadcast Enable/Disable
Client Isolation
Supports wireless client isolation between SSIDs
802.1x
Wireless clients can be authenticated through IEEE 802.1x
802.1x Supplicant
Supports 802.1x Supplicant on the Ethernet port to allow
the AP to authenticate itself to the network
Radius Server
Up to 2 Radius Servers can be configured for redundancy
purposes
WPS
Supports WPS (WiFi Protected Setup), which is a WIFI
Alliance specification for simple and secure setup of a
wireless network.
WAP4410N Specifications (Continued)