Filter
Top Products
Troubleshooting and Help
WAP4410N Wireless-N Access Point with Power Over Internet 72
A
Q. What is the maximum number of users the access point can handle?
No more than 63, but this depends on the volume of data and may be fewer if
many users create a large amount of network traffic.
Q. How do I configure multiple WAP4410N access points with the same
configuration?
STEP 1 Configure one access point and then save the configuration file through its web
page.
STEP 2 Using a text editor, change the command "secret_shown=1" to
"secret_sh own=0" in the configuration file, and then save the file.
STEP 3 Restore the file to the access point through its web page and save the
configuration, naming it AP_Config.cfg.
At this point, all keys and passwords are shown in clear text.
STEP 4 Restore the AP_config.cfg file on other access point’s through their web pages
one by one.
Windows Help
Almost all wireless products require Microsoft Windows. Windows is the most
used operating system in the world and comes with many features that help make
networking easier. These features can be accessed through Windows Help and
are described in this appendix.
TCP/IP
Before a computer can communicate with the access point, TCP/IP must be
enabled. TCP/IP is a set of instructions, or protocol, all PCs follow to communicate
over a network. This is true for wireless networks as well. Your PCs will not be able
to utilize wireless networking without having TCP/IP enabled. Windows Help
provides complete instructions on enabling TCP/IP.