Filter
Top Products
22
Chapter 5: Setting up the Wireless-G Router for Mobile Broadband Service
Using the Setup Wizard
Wireless-G Router for Mobile Broadband
9. The Router provides a Web-based Utility you can use for configuring the Router from any networked PC.
Password - Enter a password that will control access to the Utility.
Confirm - Then enter it again in the Confirm field.
Click the Next button.
10. The Setup Wizard will ask you to enter the settings for your wireless network.
Wireless Network Name - In the Wireless Network Name field, enter the name of your wireless network,
also called the SSID. The name must be identical for all devices in the network. The default setting is linksys
(all lowercase).
Channel - Select the operating channel for your wireless network. All of your wireless devices will use this
channel to communicate.
Click the Next button.
Figure 5-8: Set the Router’s Password Screen
Figure 5-9: Wireless Settings Screen
IMPORTANT: If you do NOT have your mobile broadband data card, you cannot configure the
Router for mobile broadband service. You have two choices. To continue with the Setup Wizard
to configure the wireless settings, proceed to step 14, or to configure the Router for broadband
WAN service only, proceed to “Chapter 6: Setting up the Wireless-G Router for Broadband WAN
Service Only” for instructions.