Filter
Top Products
34
Chapter 6: Setting up the Wireless-G Router for Broadband WAN Service Only
Using the Setup Wizard
Wireless-G Router for Mobile Broadband
12. The Router provides a Web-based Utility you can use for configuring the Router from any networked PC.
Password - Enter a password that will control access to the Utility.
Confirm - Then enter it again in the Confirm field.
Click the Next button.
13. The Setup Wizard will ask you to enter the settings for your wireless network.
Wireless Network Name - In the Wireless Network Name field, enter the name of your wireless network,
also called the SSID. The name must be identical for all devices in the network. The default setting is linksys
(all lowercase).
Channel - Select the operating channel for your wireless network. All of your wireless devices will use this
channel to communicate.
Click the Next button.
Figure 6-13: Set the Router’s Password Screen
Figure 6-14: Wireless Settings Screen