Filter
Top Products
79
Chapter 8: Configuring the Wireless-G Router for Mobile Broadband
The Administration Tab - Diagnostics
Wireless-G Router for Mobile Broadband
The Administration Tab - Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network components. The
reboot
Ping Test
Ping Parameters. The Ping test will check the status of a connection. Click the Ping button to open the Ping Test
screen. Enter the address of the PC whose connection you wish to test and how many times you wish to test it.
Then, click the Ping button. The Ping Test screen will then display the test results. To stop the test, click the Stop
button. Click the Clear Log button to clear the screen. Click the Close button to return to the Diagnostics screen.
Traceroute Test
Traceroute Parameters. To test the performance of a connection, click the Traceroute button. Enter the address
of the PC whose connection you wish to test and click the Traceroute button. The Traceroute screen will then
display the test results. To stop the test, click the Stop button. Click the Clear Log button to clear the screen.
Click the Close button to return to the Diagnostics screen.
Figure 8-42: Administration Tab - Diagnostics
Figure 8-43: The Ping Test
Figure 8-44: The Traceroute Test