Filter
Top Products
80
Chapter 8: Configuring the Wireless-G Router for Mobile Broadband
The Administration Tab - Factory Defaults
Wireless-G Router for Mobile Broadband
The Administration Tab - Factory Defaults
Factory Defaults
Restore Factory Defaults. Click the Yes button to reset all configuration settings to their default values, and then
click the Save Settings button. Any settings you have saved will be lost when the default settings are restored.
This feature is disabled by default. Click the Cancel Changes button to cancel your change.
The Administration Tab - Firmware Upgrade
Upgrade Firmware
To upgrade the Router’s firmware, first download the firmware from the Linksys website. Then extract the file on
your computer. Do not upgrade your firmware unless you are experiencing problems with the Router.
Please select a file to upgrade. Click the Browse button to find the extracted firmware file. Then click the
Upgrade button. For more information about upgrading firmware, refer to “Appendix C: Upgrading Firmware”.
The Administration Tab - Config Management
This screen is used to back up or restore the Router’s configuration file.
Backup Configuration
To back up the Router’s configuration file, click the Backup button. Then follow the on-screen instructions.
Router Configuration
To restore the Router’s configuration file, click the Browse button to locate the file, and follow the on-screen
instructions. After you have selected the file, click the Restore button.
Figure 8-45: Administration Tab - Factory Defaults
Figure 8-46: Administration Tab - Firmware Upgrade
Figure 8-47: Administration Tab - Config Management