Filter
Top Products
67
Chapter 8: Configuring the Wireless-G Router for Mobile Broadband
The Wireless Tab - Wireless MAC Filter
Wireless-G Router for Mobile Broadband
The Wireless Tab - Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your
network’s radius.
Wireless MAC Filter
Wireless MAC Filter. To filter wireless users by MAC Address, either permitting or blocking access, click Enable.
If you do not wish to filter users by MAC Address, select Disable.
Prevent. Clicking this button will block wireless access by MAC Address.
Permit Only. Clicking this button will allow wireless access by MAC Address.
Edit MAC Address Filter List. Clicking this button will open the MAC Address Filter List. On this screen, you can
list users, by MAC Address, to whom you wish to provide or block access. For easy reference, click the Wireless
Client MAC List button to display a list of network users by MAC Address.
To save your list of MAC addresses, click the Save Settings button to apply your changes or Cancel Changes to
cancel your changes.
Change these settings as described here, and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.
Figure 8-27: Wireless Tab - Wireless MAC Filter
Figure 8-28: MAC Address Filter List