Filter
Top Products
— 136 —
F S p n m
[Function] Printing the download NV bit images
[Code] <1C>H<70>H<n><m>
[Range] 1 n 255
0
m 3
48
m 51
[Outline] This command prints the download NV bit images (n) using a
specified mode (m).
m Mode Name
Dot Density in Dot Density in
Vertical Direction
Horizontal Direction
0,48
NORMAL MODE
203 DPI 203 DPI
1,49
DOUBLE WIDTH MODE
203 DPI 101 DPI
2,50
DOUBLE HEIGHT MODE
101 DPI 203 DPI
3,51
QUADRUPLE SIZE MODE
101 DPI 101 DPI
•“n” denotes the number of the download bit image.
• “m” denotes the bit image mode.
[Details] • The download NV bit image refers to the image that is defined
by the FS q command in the non-volatile memory and printed
by the FS p command.
• When the specified NV bit image “n” is undefined, this
command is invalid.
• When the STANDARD MODE is selected, this command is valid
only when there is no data in the print buffer.
• This command is invalid when PAGE MODE is selected.
• Any printing modes except the upside-down printing mode
(i.e. emphasis, double strike, underlining, character size,
inverted character printing, 90˚ - right-turned) are not affected.
• When the printing area set by the functions GS L and GS W is
not enough for one vertical line of the download NV bit image,
the line alone is dealt with as follows. One vertical line of the
bit image is 1dot in NORMAL MODE (m = 0, 48) and DOUBLE
HEIGHT MODE (m = 2, 50), and it is 2 dots in double WIDTH
MODE (m = 1, 49) and QUADRUPLE SIZE MODE. (m = 3, 51)
1) The printing area is extended to the right side within the
limits of the printing area so that one vertical line of the
download NV bit image can be printed.
2) When a sufficient printing area cannot be maintained even
after executing (1), the printing area is extended to the left
side. (The left margin is reduced.)