Filter
Top Products
Chapter 2 PrinterOparetion
25
4 Self-Test Mode
Check the following items in the self-test mode.
Check item Cause Remedy
Head disconnected Replace head
Dot missing
Dust adhered Clean head(→Section 5 Chapter 4)
Head offset changed in position Adjust head offset (→Section 1 Chapter 4)
Totally blurred
Printing energy low
Adjust printing energy
(→Command Reference)
Partially blurred
Head pressure unbalanced
Adjust head pressure
(→Section 2 Chapter 4)
Ribbon wrinkling and
slipping
Ribbon tension improper
Adjust ribbon tension
(→Section 3 Chapter 4)
2. After self-test printing, the printer enters data dump mode.
The communication contents can be checked by printing the communication data in ASCII code.
3. Return to normal operating mode after turning off the power switch.
Sample 2
203 dpi
Sample 2
400 dpi