Filter
Top Products
Appendixes
62
2 Specifications
Main Specifications
Item CLP-7001/7002 CLP-7401
Main scanning line density:
203 dots/in (8 dots/mm)
Main scanning line density:
400 dots/in (15.75 dots/mm)
Resolution
Sub-scanning line density:
203 dots/in (8 dots/mm)
Sub-scanning line density:
406 dots/in (16 dots/mm)
Printing method
Direct-thermal or thermal-
transfer printing
←
Max. print width 104 mm
4.1 in
105.7 mm 4.2 in
Max. print length 812.8 mm 32 in
254
mm
10 in
Printing
Print density Adjustable with software
←
Printing
speed
Printing speed
setting
2–7 in/sec in one-inch units (for
CLP-7001)
2–6 in/sec (for CLP-7002)
1–4 in/sec in one-inch units
Batch mode
Performs normal printing (single
or multiple sheets)
←
Peel mode
Peels label from the liner after
printing label
←
Cut mode
Prints and cuts by the specified
number of sheets (label back-
feeding enabled)
←
Print mode
Tear-off mode
Feeds back paper to the print
starting position after tearing
paper
←
Type of paper
Roll or fanfold (continuous label,
die-cut, continuous tag or ticket)
←
Kinds of paper
Direct-thermal or thermal-
transfer paper
←
Max. liner width 118 mm 4.65 in
←
Min. liner width 25.4 mm 1 in
←
Min. label width 7.62 mm 0.3 in
←
Min. paper pitch
5.08 mm 0.2 in
←
Max. paper
thickness
0.254 mm 0.01 in
←
Min. paper
thickness
0.0635 mm 0.0025 in
←
Paper
On-board roll
paper diam.
Max. outer diam.:
203 mm
Paper core:
38–76 mm
8in
1.5–3 in
←
Width
25.4–114 mm (1–4.5 in) freely
adjustable
←
Length, max. 360 m 1,181 ft
←
Max. outer diam. 74 mm 2.91 in
←
Ribbon
Paper core inner
diam.
25.4 mm
±0.254 mm
1in
±0.01 in
←