Filter
Top Products
Chapter 3 Paper and Ribbon
36
3 Media Handling
(When Using Adjustable Sensor)
The adjustable sensor is the standard for CLP -7001 and CLP-7401 but it is the optional for CLP-
7002.
Check that the adjustable sensor is set to ‘AJSensON.’ (See Chapter 2.)
Minimum value mm (in) Maximum value mm (in)
A Label width 25.40 (1.0) 118.00 (4.65)
B Liner width 25.40 (1.0) 118.00 (4.65)
C Label left edge position 0 2.54 (0.10)
D Label paper gap length 2.54 (0.10) 2539.00 (99.96)
E Label length 12.70 (0.50) 2539.00 (99.96)
F Label pitch 12.70 (0.50) 2539.00 (99.96
G Liner thickness 0.06 (0.0025) 0.125 (0.0049)
H Paper thickness 0.06 (0.0025) 0.25 (0.01)
I Notch right end position 3.6 (0.14) 60.8 (2.39)
J Notch left end position 0 57.2 (2.25)
K Notch length 2.54 (0.10) 17.80 (0.70)
L Black line right end position 15.00 (0.59) 66.5 (2.62)
M Black line left end position 0 51.5 (2.02)
N Black line width 3.18 (0.125) 17.80 (0.70)
Note: • Paper having both label paper gap and black line should use the paper-gap sensor.
• Fanfold should use the paper-gap sensor.
Size of paper
Label paper
Continuous paper
Notch detection Black line detection
Printable
area
Blackline
OD value: 1.5 or
more
Carbon black ink
Label
Label
Label
Using paper gap
adjustment sensor
Using paper gap
adjustment sensor
Using black line
adjustment sensor
Direction of paper feed
2.5mm 104.0mm (11.5mm)
Left margin Printable area Right margin
Printable area