Chapter 5 Power ON and Using the Control Panel
-
39 -
5.7
Producing a Test or Configuration Print
When the Test Mode is selected from the Group Menu, test and configuration prints, head element check
and Hex Dump mode can be selected. The two test print patterns and two configuration printouts are
available.
= Example: producing a test pattern print
Press the key to display the Group Menu display.
Select the ‘* Test Mode’ menu from the Group Menu
· Press the key to move the display to ‘* Test Mode.’
Show the Menu Items within Test Mode menu
· Press to bring up the Test Mode Menu Items
· The display will show ‘Print Pattern.’
Show the values for the possible Test Patterns.
· Press to bring up the Test Pattern values.
· The display will move to ‘Current Settings.’
Change Current Settings to Pattern Sample.
· Press to change from ‘Current Settings’ to ‘Pattern
Sample.’
To print the selected pattern.
· Press to ‘execute’ the request and print the pattern.
· When the sample has printed, press to return to the
previous menu.
* Page
Setup
* Test
Mode
Print
Pattern
Current
Settings
Pattern
Sample
Printing
