Filter
Top Products
Chapter 8 Maintenance
- 57 -
Chapter 9
99
9
Specifications
9.1 General specifications
Item CLP-8301
Printing method Thermal Transfer/Direct Thermal
Printhead resolution 300 DPI (11.81 dots/mm) approx
Maximum print width 219.5 mm (8.64”)
Print length 12.7 mm (0.5”) - 508.0 mm (20”)
Print speed 2 - 4 IPS
Media Max. roll media outer diameter: 203 mm (8 in)
Max. media width: 228.6 mm (9”)
Media pitch detections Movable transparent and reflective sensors
Ribbon Max. ribbon length: 450 m (1,476 feet)
Max. ribbon outer diameter: 78 mm (3.07”)
Bar codes Code 39/93/128 (A/B/C), EAN 8/13, UPC-A/E, UPC-2&5-Digit
Codabar (NW-7), Interleaved 2 of 5, UCC/EAN 128
PDF-417, UPS MaxiCode, DataMatrix, telepen
Indications LCD: 8 columns x 2 rows. LEDs: POWER and READY
Control keys Setup keys (six): MODE, MENU, SELECT, EXIT, UP and DOWN
Execution keys (four):
STOP, FEED, PAUSE and REPEAT
Graphic data 7-bit ASCII, 8-bit HEX, PCX and BMP
Interfaces Standard: RS-232C serial (max: 115.2 kbps) and Centronics parallel
Optional:
USB, Ethernet and IEEE 1284 ECP
Options By dealer (reseller): USB, Ehernet and IEEE 1284 ECP
Power input voltage 100V - 240V (-10%+6%), 1.6 - 3.2A, 50/60HZ
Power consumption Typical Operating: XXXW, Stanby: XXW
Operating temperature and
humidity
5 - 40ºC (41 - 104ºF), Rh25~85% (non-condensing)
Outer dimensions 395W x260H x 415D mm (15.5W x 10.2H x 16.3D in) approx
Weight 18 kg (39.68 lb) approx, excluding media and ribbon
Standards 120V: UL1950 CSA: No. 950 FCC: Class A
220V - 240V: EN60950, EN55022, EN55024, EN61000-3-2, EN61000-3-3