Filter
Top Products
Disassembly
3 - 11
Separate the notebook base in two
With the CPU and heatsink, keyboard, HDD and CD-ROM/DVD-ROM drive removed:
1. Remove screw (I), the LCD panel ground wire
and Inverter power ground wire. When rein-
stalling make sure to place the LCD panel
ground wire on top of the case and the Inverter
power ground on the inside of the case just above
the hex nut (figure 3-14).
figure 3-13
figure 3-14
2
3
4
5
1
I
@
1 Philips screwdriver
1 Hex socket wrench
Top: 1 Screw
1 Hex nut
Right Side: 1 Screw
Bottom: 6 Screws
Bottom Rear: 3 Screws
i
1) microphone
connector
2) LCD panel
connector
3) Inverter power
connecter
4) LCD panel ground
5) Inverter power
ground