Filter
Top Products
Service Manual
3 - 14
Remove the Fan
1. Unplug fan cable from
mainboard.
2. Lift out the fan.
Remove the FDD assembly
1. Remove screw (I).
2. Remove the Hex nut (Q).
3. Lift the FDD assembly off of the
mainboard.
Remove the CD-ROM tray
1. Remove screws (I).
2. Remove screw (F)
3. Slide the tray slightly to the right and lift it off
of the mainboard.
1 Philips screwdriver
1 Hex socket wrench
FDD:
1 Stand-off Hex nut
1 Screw
CD-ROM tray
3 Screws
@
For information on
removing the FDD from
the FDD assembly go to
Appendix A.
Note
i
1) Fan
2) Fan cable
3) Fan cable connector
4) FDD assembly
5) CD-ROM tray
figure 3-19
1
3
I
Q
4
I
5
I
2
F