Filter
Top Products
Chapter 2: About the Printer8
A799 Two-Color Thermal Receipt Printer: User Guide A799-UG00001 Rev. D 11/2012
Printer controls
Conguration switch (DIP switch 1)
The conguration switch allows you to change the conguration settings of the printer.
Paper feed button
During normal use, the paper feed button advances the paper. It is also used to access the conguration menu.
LED
The green LED indicates basic information about the printer status. A steady green light means the printer is on and
operating normally. A ashing LED means the printer needs operator assistance. Refer to the troubleshooting section on
page 26 for more information.
Beep
A single beep means the printer has successfully completed its startup routine. It should beep after being powered up or
reset.
If the printer beeps twice, it may be experiencing a problem. Refer to the troubleshooting section on page 26 for more
information, or use the interactive tech support tool on our website at www.tpgprinters.com/techsupportpub.aspx
Connector Cover
The connector cover provides protection and strain relief for the printer connectors and cables. This cover should remain
on the printer and utilized as described in Chapter 3, Cable routing.
LED
(Green)
Paper
Feed
Button