Filter
Top Products
E-23
When 90-deg rotation is chosen
Regular Operation
This section describes the use of direct operation using the projector and remote control buttons.
Please see the items on Page E-32 "Menu Operation Method" and Page E-39 "Menu Description" for information
about operation using the menu.
Select the Input
Operation with the Projector
Select the input using the INPUT buttons.
The input switches in the order OHP → PC →
VIDEO or OHP → VIDEO (
Component
) → VIDEO
each time the button is pressed.
Operation with the Remote Control
Select the input using the INPUT buttons.
When the projector’s power is turned on, one of the input selection icons ([OHP, PC or VIDEO] or [OHP, VIDEO
(Component) or VIDEO]) is displayed.
ON/STANDBY
LAMP/COVER
TEMP
FREEZE OFF
FREEZE/CAPTURE
ROTATION
INPUT
TRANSFER
OHP PC VIDEO
OHP
VIDEO (D4)
VIDEO
(When the PC input is set to RGB)
(When the PC input is set to component)
* For instructions on selecting the PC input, see page E-39.
NOTE:
• The input mode at starting time will be the same as it was the last time the
projector was switched off.
• When the icon is displayed, either the left or right key permits input switch-
ing.
• The color mode icon is displayed at the leftmost end.
• For the color mode, see page E-41, “Image Adjustment.”
Changing the Orientation of the Projection Image
Effective Only with OHP Input
The direction of the video currently projected is changed over every 90 degrees (clockwise).
The changed video is displayed according to the lateral axis of the screen.
Operation with the Projector
Press the ROTATION button.
Operation with the Remote Control
Press the ROTATION button.
ON/STANDBY
LAMP/COVER
TEMP
FREEZE OFF
FREEZE
/CAPTURE
ROTATION
INPUT
TRANSFER
• Pressing the ROTATION button displays the rotation selection icon. Choose
the intended direction. With changeover of the video, the display disappears.
Standard
Presentation
Natural Blackboard
Color mode icon table
Light blue
(currently dis-
played location)
Green frame
(chosen location)