Filter
Top Products
Recommended Equipment
1-8
The M-LVDS Evaluation Module
Figure 1−8. EVM Configuration for Including a Ground Potential Difference Voltage
Between Nodes
PS1
PS2
PS3
Jumpers removed from
W7, W8, W9, W10
W9
W7
W8
W10
J13 J14 J17 J18
+
−
+
−
+
−
1.5 Recommended Equipment
- 3.3 Vdc at 0.5-A power supply or multiple power supplies (with both
devices powered and enabled the board draws about 35 mA).
- A 100-Ω transmission medium from the driver to the receiver, (twisted-pair
cable recommended, CAT5 cable for example).
- A function or pattern generator capable of supplying 3.3-V signals at the
desired signaling rate.
- A multiple-channel high-bandwidth oscilloscope, preferably above the
1-GHz range
- Differential or single ended oscilloscope probes.