Filter
Top Products
Modular SAN Array Fabric Switch 6 User Guide A-1
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: f-appa Regulatory Compliance Notices.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/11/02 2:28 PM
A
Regulatory Compliance Notices
Federal Communications Commission Notice
Part 15 of the Federal Communications Commission (FCC) Rules and Regulations
has established Radio Frequency (RF) emission limits to provide an interference-free
radio frequency spectrum. Many electronic devices, including computers, generate
RF energy incidental to their intended function and are, therefore, covered by these
rules. These rules place computers and related peripheral devices into two classes, A
and B, depending upon their intended installation. Class A devices are those that may
reasonably be expected to be installed in a business or commercial environment.
Class B devices are those that may reasonably be expected to be installed in a
residential environment (personal computers, for example). The FCC requires
devices in both classes to bear a label indicating the interference potential of the
device as well as additional operating instructions for the user.
The rating label on the device shows which class (A or B) the equipment falls into.
Class B devices have an FCC logo or FCC ID on the label. Class A devices do not
have an FCC ID on the label.