Filter
Top Products
Initial Configuration of the Switch
2-6 Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: c-ch2 Initial Configuration of the Switch.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/17/02 7:46 AM
Accessing Networking Parameters
Select option 2. Networking parameters to access the Network Parameter menu,
which is shown Figure 2-2. The first option in this menu allows the user to return to
the main menu. Any changes made are reset to the previous value.
The second, third, and fourth parameters are used to configure the Ethernet settings
for the MSA Switch. All these parameters must be set appropriately for the site
before the MSA Switch can be managed over the Ethernet and connected to using
telnet.
Figure 2-2: Network Parameters menu