Filter
Top Products
Initial Configuration of the Switch
2-14 Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: c-ch2 Initial Configuration of the Switch.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/17/02 7:46 AM
2. In the main ACU-XE screen, select an MSA1000 Controller from the controller
list in the left column of the screen.
Three configuration methods are displayed at the bottom portion of the screen:
• Assisted Configuration is used to configure the controller.
• Advanced Configuration is used to configure the controller.
• Switch Configuration is used to configure the switch.
Figure 2-8: ACU-XE main screen
3. Select Switch Configuration.
All available switches detected by the ACU-XE for the selected controller are
listed.
In the example shown in Figure 2-9, two switches were detected.