Filter
Top Products
Command Line Interface
C-32 Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: h-appc Command Line Interface.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 8/7/02 9:39 AM
Example:
Figure C-36: Topology command
Traps
This command displays and modifies the trap entries. The <ip.port> specifies
the trap IP address and trap port address. The format for <ip.port> is
ip.ip.ip.port.8 trap entries are supported. Valid range for ‘ip’ is 0 – 255.
Valid range for ‘port’ is 1-2147483647, normally 162.
Syntax
Traps
Traps Add <ip_address,port_number>
Traps Delete <ip_address,port_number>
Traps Filter <ip_address,port_number>
Traps State <ip_address,port_number>