Compaq Switch 6 Switch User Manual


 
Initial Configuration of the Switch
2-16 Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: c-ch2 Initial Configuration of the Switch.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/17/02 7:46 AM
Initial Switch Configuration
After a switch is selected in the Switch Configuration screen, available configuration
tasks for that switch are listed. See Figure 2-10 for an illustration of these
configuration task options.
During the initial configuration of the switch, only one option is displayed. If the
switch has already been configured and is active, additional tasks are displayed.
These additional tasks are discussed in the following section, Advanced Switch
Configuration.
To initially configure the switch:
1. Select ACU-XE Switch Configuration.
Figure 2-10: Initial Switch Configuration task option
An input screen is displayed. See Figure 2-11.