Filter
Top Products
Command Line Interface
Modular SAN Array Fabric Switch 6 User Guide C-35
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: h-appc Command Line Interface.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 8/7/02 9:39 AM
Variables Description
ip_address,port number
ip_address The IP address of the SNMP trap recipient whose
state you want to set.
port_number The port number of the SNMP trap recipient whose
state you want to set.
trap_state
active Sets the specified port recipient to the “Active” state.
Traps configured to be sent to this device will be
forwarded to it.
inactive Sets the specified port recipient to the “Inactive”
state. Traps configured to be sent to this device will
not be forwarded to it.
Examples:
Figure C-37: Traps command
Figure C-38: Traps add command