Filter
Top Products
4: Configuring the Web Interface
AlterPath Console Server User Manual 99
Power Management Access
There are three ways in which the General form allows you to access Power
Management:
•SSH
•Telnet
• SSH and Telnet
1. Go to Ports > Physical Ports > General.
2. From the Connection Protocol pull down menu of the General tabbed
form, select Power Management.
The system invokes new fields for selecting the connection type.
3. From the invoked dropdown entry field (Allow Access by), select the
desired connection type.
The system activates the Access and Other tabs.
4. If you selected SSH and/or Telnet, select the Access tab.
5. From the Access tabbed form, configure the authentication method for
SSH and/or Telnet, as selected from the previous form.
6. If Biometric authentication is required, select and complete the Other
tabbed form.
7. Click on Apply Changes to save your configuration to Flash.