Filter
Top Products
Appendix B: Safety Guidelines
AlterPath Console Server User Guide 135
DANGER!
Do not push any objects through the openings of the ACS. Doing so
can cause fire or electric shock by shorting out interior components.
Important!
Keep your ACS away from heat sources and do not block host’s
cooling vents.
Important!
The AlterPath Console Server product (DC version) is only intended
to be installed in restricted access areas (Dedicated Equipment Rooms,
Equipment Closets or the like) in accordance with Articles 110-18,
110-26 and 110-27 of the National Electrical Code, ANSI/NFPA 701,
1999 Edition.
Use 18 AWG or 0.75 mm2 or above cable to connect the DC
configured unit to the Centralized D.C. Power Systems.
Install the required double-pole, single-throw, DC rated UL Listed
circuit breaker between the power source and the AlterPath Console
Server DC version. Minimum Breaker Rating: 2A. Required
conductor size: 18 AWG.
Working inside the AlterPath Console Port Server
Do not attempt to service the AlterPath Console Server yourself, except when
following instructions from Cyclades Technical Support personnel. In the
latter case, first take the following precautions:
1. Turn the AlterPath Console Server off.
2. Ground yourself by touching an unpainted metal surface on the
back of the equipment before touching anything inside it.