Filter
Top Products
4: Configuring the Web Interface
32 AlterPath Console Server User Manual
Occasionally, an Expert Mode menu selection will comprise multiple forms
(such as the one shown above). These forms are identified by their tabs. Select
the tab to access the desired form.
Button Functions
The control buttons located on the bottom of the ACS Web Configuration
window provide you the following functions for operating the interface.
Saving Your Configuration
The Unsaved Changes indicator on the lower right hand corner of the ACS
web configuration window serves to remind you that you have made a
configuration entry or change which has not been saved.
Button Name Use this button to:
Wizard / Expert Wizard / Expert Switch the ACS Web Configuration
Screen to either Expert or Wizard Mode. The Expert
Mode is the default mode; in this mode, the Wizard
button is visible and vice versa.
Help? Invoke the online help sub window which provides
help information relating to the current form.
Back Traverse to the previous form (i.e., the form
preceding the current form as it appears in the
menu).
Try Changes Test or run the system based on the settings from the
current form without having to save the
configuration.
Cancel Changes Cancel your changes or reverts back to the original
configuration values.
Apply Changes Save your changes to the ACS Flash card.
Next Traverse to the next form (i.e., the form succeeding
the current form as it appears in the menu).