Filter
Top Products
4: Configuring the Web Interface
AlterPath Console Server User Manual 121
Administration > Boot Configuration
Boot configuration defines the settings for loading the operating system. In
the event that the ACS fails to boot successfully, you can use the Boot
Configuration form to change the boot settings.
The ACS can boot from its internal firmware or from the network. By default,
the unit boots from Flash. If you need to boot from the network, install one
TFTP or BOOTP server with the firmware to boot from, and then choose boot
from network and fill in the fields. You may skip Flash test and RAM test
for a faster boot.
1. From the top menu, select Administration; from the left menu, select
Boot Configuration.
The system brings up the Boot Configuration form:
2. Complete the fields as follows:
Field Name Definition
IP Address assigned to
Ethernet
As indicated.
Watchdog Timer Sets the Watchdog Timer to Active or Inactive.