Cyclades ACS48 Network Hardware User Manual


 
4: Configuring the Web Interface
AlterPath Console Server User Manual 89
3. Type in the new or modified host address in the IP Address field, and the
host name in the Name field, and then select the OK button.
4. To delete a host, select the host you wish to delete from the Host Table
form, and then select the Delete button from the form.
5. Select the Apply Changes button to save your configuration to Flash.
Network > Static Routes
The Static Routes form allows you to manually add routes. The Routing Table
defines which interface should transmit an IP packet based on destination IP
information. Static routes are a quick and effective way to route data from one
subnet to another.
You can add or edit a hard-coded static route by clicking on the
corresponding buttons. They'll bring you to a dialog box to enter the route to
be added. To delete a static route, highlight the route and then select the
Delete button.
1. From the top menu bar, select Network; from the left menu panel, select
Static Routes.
The system brings up the Static Routes table form:
Refer to the field definitions in Step 3 for the meaning of each
field in the table.