Filter
Top Products
4: Configuring the Web Interface
124 AlterPath Console Server User Manual
Read the succeeding section, Backup and Restore Procedure, for a
more detailed explanation of the fields.
3. Select Save to FTP Server or Upload from FTP Server, as appropriate.
Backup and Restore Procedure
For backup purposes, you can give the configuration backup file a name
according to your company’s naming convention.
From the Backup Configuration form, fill in the fields with the server name
(i.e., the IP address of your workstation if you have just installed an FTP
server in it), Username and Password (for a valid username defined in your
FTP server), and the Path and Filename to which you have rights to access
and write. The Path and Filename field must contain the full path and the
filename that you will assign to the backup file.
Example:
To upload to the upload folder with the filename, AcsxxxxConfig040521,
type in the following in the Path and Filename field:
upload/AcsxxxxConfig040521
Always check the FTP server’s upload folder after you have selected the Save
to FTP Server button. Ensure that the file is there as some FTP servers do
not return error conditions, which can cause the AlterPath ACS to display a
“DONE” result even though the FTP did not store a copy.