Filter
Top Products
VS-1200 Data Acccess Switch18
© 2009 Datacom Systems Inc
4.1.2 Password Recovery
Password Recovery is provided for cases where a user has forgotten the Superuser and/or
Administrator login password. Password recovery is accomplished by connecting to the unit serially
using a HyperTerminal like program and rebooting the unit. As the power-up sequence is occurring,
depress <Control> <C>. Upon receipt of this command, a text recovery key will be generated and
displayed prior to the prompt. This key is used to reset the passwords. An example recovery key
prompt is: 617A6185774$
You must call Datacom Service Center with this recovery key in order to obtain the required
response to reset passwords. Given a valid reset response, the factory default passwords will be
saved in Non-Volatile memory. If an invalid response is given, a new recovery key will be calculated
and displayed at the prompt, as described above, after first clearing the screen.
4.1.3 Basic Commands (Read Only Access)
The following section shows the long form of the basic command set with the shortcut input for the
command noted in parenthesis. All commands, either the exact long form or the shortcut form, are
entered after the prompt (default >) at the cursor. No auto-fill mode is available. After the topic
heading, a brief overview of the command display function is given followed by an example
(Example: >) command input.
4.1.3.1 HELP (HE) or (?)
When this command is entered, a list of commands, their shortcut inputs, and their descriptions will
display. For the use and application of each command, refer to the individual command description
within this section. The HELP command displays the available commands as shown:
Example: > ?
Available commands:
HELP HE / ? Show Help
EXIT EX Exit Shell
SHOW SH Show All Current Configurable Values
SHOW PRODUCT SH PR Show Product Name and Serial Number
SHOW TIME SH TI Show System Date and Time
SHOW MANAGEMENT SH MA Show Management Configuration
SHOW PORT CONFIG SH PO CO Show Port Configuration
SHOW PORT ROUTING SH PO RO Display Routing Summary
SHOW GROUPS SH GR Show Group Configuration
SU SU Enter Superuser Mode
SU SET PASSWORD SU SE PA Set Superuser Password
SHOW USERS SH US Display Users
SET IP SE IP Set IP
SET SUBNET SE SU Set Subnet Mask
SET GATEWAY SE GA Set Default Gateway
SET PROMPT SE PR Set Command Prompt (max 32 bytes)
SET DATE SE DA Set System Date
SET TIME SE TI Set System Time
SET PORT NAME SE PO NA Set Port Name (max 32 bytes)
SET PORT SPEED SE PO SP Set Port Speed