Datacom Systems VS-1200 Switch User Manual


 
Application 47
© 2009 Datacom Systems Inc
7 Application
This section will present techniques and applications describing the practical use and new remedies
for performing network analysis requirements using VS-1200 series solutions.
7.1 Gathering the Data (HyperTerminal configuration example)
PREMISE: This application consists of workgroup switches that allow end users to access a group
of servers. The servers are connected to a single server switch and the users are distributed across
several workgroup switches. The security department wants to see all server bound access from the
users and server to server traffic.
GOAL: This application will use a VS-1210BT/SFP as follows:
1.
TAP access to critical server
2.
Aggregate SPAN.
3.
Provide access for analysis, security and recording devices.
The first goal requires an external tap between the server switch and the critical financial server. The
tap copies all the data going to the financial server, and can't be shutdown like a SPAN port. The
tap allows enhanced visibility for security purposes.
The second goal requires that a SPAN port is configured on the workgoup switches. This will only
allow workgroup traffic to be replicated out the SPAN port.
The third goal involves aggregating and replicating traffic from the two previous goals for specific
security and network analysis to be done.