Filter
Top Products
Initial Configuration 29
© 2009 Datacom Systems Inc
Step 2. Connect your PC and VS-1200 using the provided Datacom Systems DRL512-2M-R
cable. Connect the DB9 Female pin end to the serial port on your PC and connect the DB9 Male
pin to the SERIAL port on the unit.
NOTE: For PCs without 9-pin serial ports, check with your product representative for available
sources of a USB to RS-232 Plug-in Adapter.
Step 3. Open the HyperTerminal application on your PC by selecting START > All Programs >
Accessories > Communications > HyperTerminal
Step 4. Name a new HyperTerminal connection and select OK