Filter
Top Products
VS-1200 Data Acccess Switch26
© 2009 Datacom Systems Inc
4.1.4.15 DELETE USER (DE US)
This command deletes users as shown:
DELETE USER (USERNAME)
Example: # DE US edituser
User edituser deleted
#
4.2 SERIAL Port Configuration (DB9)
Note: Use of the SERIAL DB9 port, which is fairly simple and straight forward, is strongly
recommended for initial configuration of the hardware.
Once VS-1200 series connection is made to the SERIAL DB9 port, open the terminal emulation
application and create a connection with settings that fit your needs:
4.2.1 HyperTerminal
The following example utilizes Microsoft HyperTerminal. Any freely available terminal emulator may
be utilized, but please take note of the specific HyperTerminal setup settings if an alternate terminal
emulator is used.
HyperTerminal (terminal emulator) enter:
9600 bits per second
8 data bits
Parity none
1 stop bit
Flow control none
After completing review of the Command Line Interface (CLI) section and Exercise - CLI setting
Ports section, detailed IP Address configuration can be found in the IP Address Configuration
section.
17
36 28