Filter
Top Products
VS-1200 Data Acccess Switch22
© 2009 Datacom Systems Inc
4.1.4 Superuser Commands (Configuration Access)
The topic headings in the following section show the long form of the Superuser command set with
the shortcut input for the command noted in parenthesis. After the topic heading, a brief overview of
the command display function is given followed by an example (Example: #) command input. All
commands are entered after the prompt (default #) at the cursor. No auto-fill mode is available.
4.1.4.1 SU (SU)
This command accesses the Superuser mode where the product can be configured. A password
prompt is displayed and the default password is “password.” Then the Superuser prompt is
displayed. It looks exactly like the basic prompt, except the prompt end has turned from “>” to “#,”
as shown below:
> SU (SU)
Enter Password: ********
#
4.1.4.2 SU SET PASSWORD (SU SE PA)
This command is used to change the Superuser access password as shown:
SU SET PASSWORD (SU SE PA)
Example: # SU SE PA
***Warning***
Modification of the SU password has serious consequences if the password is lost!!
***Warning***
# Enter Password: ********
# Confirm Password: ********
#
4.1.4.3 SHOW USERS (SH US)
SHOW USERS (SH US): This command displays all users for the configurable product.
SHOW USERS (SH US)
Example: # SH US
Administrator
edituser
4.1.4.4 SET PROMPT (SE PR)
This command, followed by a text string, changes the Base Prompt to the text value entered (up to
32 characters) as shown:
# SET PROMPT (SE PR) prompt text
Example: # SE PR Datacom
Datacom#